Description

FUNCTION ..

Designed and manufactured for machining wood and wood – like materials .

Use for joining tow woods and wood – like material by using special hot – melt glue .

Description

FUNCTION ..

The automatic milling machine OMEC F9 is used to make parallel joints for indoor frames and other furniture pieces .

The machine is equipped with a cutter unit and tow saw units to allow the machining of 45 degrees cut and joints .

 The machine is designed to automatically and independently manufacture both sides and top .

Pieces are clamped automatically at the beginning of each cycle and released once the cycle has been completed .

The machine is operated though the controls provided on the control panel on the machine board .

The F9 model is operated through a numeric  control (CNC) system , which manages the working cycle .

Description

FUNCTION ..

Press machine to apply PVC on 3D .

Upstroke movement of the platen .

Description

FUNCTION ..

This has been designed to plane wood and similar materials .

It can’t be used to machine light alloyed materials ( aluminum , bronze , etc ) steel , plaster and asbestos cement .

Description

FUNCTION ..

Multi blade RIP saw is designed to cut wood into specified size and pieces .

Since the machine can contain more than tow sets of blades inside the chamber , it can cut wide solid wood or similar materials into tow or more pieces .

Description

FUNCTION ..

This machine is used to spread glue into large panels of wood or similar materials with a minimum amount of time .

It is equipped  with tow rubber rollers which are automatically rotated by a 0.37 KW motor .

Description

FUNCTION ..

This machine is used to press wood panels and similar materials in hot or cold state.

Powered by hydraulic cylinders and heated by thermal oil .

Suitable to press veneers on doors or other wooden panels .

Description

FUNCTION ..

This machine Is designed for the purpos of double – end trimming and tenoning for wooden flooring and furniture industry .

Feed chains for continuous feeding , with frequency inverter for accurate speed change .Working which is adjusted by automatic width setting system Three combination modes of the top pressure belts and the bottom feed chains , for different working .Automatic lubrication system keep the feed chains well lubricated .

Description

FUNCTION ..

This machine is designed to sand the wood panels or similar materials into a specified thickness with fine results .

Equipped with tow powerful rollers , this machine can perform sanding with different grits starting from grit 60 to grit 280 .

Description

FUNCTION ..

This machine is designed for the application of glue to straight edging and irregular shape work pieces with external radii .

This machine is suitable for veneer and plastic edging .